emperor's new architecture research

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== quadricone zurich noservo py ======

<code python>
import subprocess, glob, time, csv, random

''' some naming clarifications:
Servo is a class for motors, where movement is defined
Servos is a dictionary of servo names and positions
servo is used in the while loop to refer to an item of the Servos dictionary
'''

### the moving part -------------------

class Servo:
    def __init__(self, servoID):
        self.servoID=servoID
        self.startPos() # when initiated, go to zero
 
    def move(self, position):
        self.position=position
        print self.servoID, "\'s given position is", self.position
        if (10 <= self.position <= 120):
            print "everything OK, will write", self.position
        elif 120 < self.position < 170:
            print "will adjust to 160", self.position
            self.position=160
        elif self.position > 170:
            print "MAX", self.servoID, "is in maximum position"
            self.position=180
            print "MAX: Servo will now go to", self.position
        elif self.position<10:
            print "MIN", self.servoID, "is in minimum position"
            self.position=0
            print "MIN: Servo will now go to", self.position
        else:
            print "how did this happen?"
 
        
    def startPos(self):
        self.move(0)


## initiate the morots and put them all in the start (0) position
## alternative

Servos={"raja":0, "gaja":0, "vlaja":0, "zlaja":0}
for i,servo in enumerate(Servos):
    globals()[servo]=Servo(i+1)
    globals()[servo].startPos()

#key_pos=[0, 0, 0, 0]

### the scanning part -----------------

# airodump-ng is running and logging the results into a csv file
# with the following command: sudo airodump-ng -o csv -w manuf mon0
# subprocess looks for the last edited csv file in current folder
# this file is parsed by the csv module to find the number of data packets that have passed through the network since the last check 

csvs=subprocess.Popen("ls -t1 *csv | head -1", shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
csv_last=csvs.communicate()[0].strip()

key_value=(' # IV') # look up this value in the scan dump

def lookup(dump):
    datas=[]
    results=[]
    scan=open(dump, "rU")
    next(scan)
    scanDict=csv.DictReader((line.replace('\0','') for line in scan), delimiter=',')
    for adict in scanDict:
        if adict.has_key(key_value) and adict.get(key_value)!=None:
            try:
                datas.append(int(adict.get(key_value)))
            except:
                pass
    datas.sort(reverse=True)
    for i in range(4):
        results.append(datas[i])    
    return results
    
### the main loop ----------------------
    
packet_list=lookup(csv_last)
print 'packet_list', packet_list
#random.shuffle(servo_list)
#print 'servo_list', servo_list
time.sleep(3)

while True:
    new_packet_list=lookup(csv_last)
    print "//////////////////////"
    print "..."
    print 'new_packet_list', new_packet_list
    print 'calculating the movements...'
    print "starting key positions: ", Servos
    for i,servo in enumerate(Servos):
        print "i!!!!i!!!!i!!!!!"
        print 'servo:', servo
        pos=Servos.get(servo)
        packet_diff=new_packet_list[i]-packet_list[i]
        print 'packet_diff:', packet_diff
        if packet_diff==0:
            new_pos=pos-10
            print 'go down', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            if new_pos<0:
                Servos[servo]=0
            else:
                Servos[servo]=new_pos
        elif 12 > packet_diff >= 1:
            new_pos=Servos.get(servo)+5
            if new_pos < 10:
                new_pos=10
            print 'go up very small', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            Servos[servo]=new_pos # update key position for the next round
        elif 36 > packet_diff >= 12:
            new_pos=Servos.get(servo)+8
            if new_pos < 10:
                new_pos=10
            print 'go up small', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            Servos[servo]=new_pos # update key position for the next round
        elif 80 > packet_diff >= 36:
            new_pos=Servos.get(servo)+10
            print 'go up middle', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            Servos[servo]=new_pos # update key position for the next round
        elif 180 > packet_diff >= 80:
            new_pos=Servos.get(servo)+20
            print 'go up big', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            if new_pos > 180:
                Servos[servo]=180
            else:
                Servos[servo]=new_pos # update key position for the next round
        elif packet_diff >= 180:
            new_pos=Servos.get(servo)+50
            print 'go up very big', new_pos
            globals()[servo].move(new_pos)
            time.sleep(0.2)
            if new_pos > 180:
                Servos[servo]=180
            else:
                Servos[servo]=new_pos # update key position for the next round
        else:
            print 'key_pos:', Servos.get(servo) , 'packet_diff:', packet_diff, 'and i am out of options'
    print "!!!!!!!!!!!!!!!!!!!!"
    print "new list of key pos", Servos
    packet_list=new_packet_list # update packet list
    time.sleep(10)

</code>
emperor's new architecture research

User Tools

Site Tools

Page Tools
