Connect or Not: Buhne A, Zurich, November 2013

Android application > OSC data stream > Puredata patch airodump > csv ANDROID APP [PLAY]

          |                              |
          |                              |
          |                              |
          milicone-backup.py [PLAY]      |
          |      |                       |
          |      |                       |
          |    [OSC] :50000>           [OSC] :50000>
          |      |                             |   :49999>
          |      |                             |     |
          |      [ I N T E R A C T I O N ]     |     |
          |      PD: OSC_pd_Arduino-DMX.pd <:50000   |
          |                              |           |
          |                              |           |
          |                              |           |
          |                              |
          |                            DMX shield + Arduino > RGB Light
          |
          |                                          |
          |                                          |
          |                                          |
          |                        [ D O C U M E N T A T I O N ]
          |                        receive-osc.py > log/log(+UNIXtimestamp).txt <:49999
          |_______________________ milicone-direct-backup.py > log(+UNIXtimestamp).txt

RGB LED theatre lights + DMX shield + Arduino + Connect or Not Android app + laptop

• 2 RGB LED light spots: Teclumen Fusion color 18 FC RGBW; (datasheet) DmxSetup: [1RGB, 8 channel]; (teclumen-test-pd) /OR/ Wybron Cygnus VN100 model 7500 (datasheet) DmxSetup: addr 0001 / res 8bit / fdr ON / HSP OFF / (wybron-test-pd)
• Arduino Uno
• DMX shield by Conceptinetics
• laptop (Debian Wheezy) with built in wireless adapter Intel® Centrino® Advanced-N 6205 with Intel(R) Wireless WiFi driver for Linux, 3.11-2-amd64 (iwlwifi)
• smartphone (Samsung Galaxy S3, Android 4.0.4)

• Arduino DMX Simple library, customized
• arduino.pd
• puredata patch with OSC server and lights controls puredata patch using Wybron OR puredata patch using Teclumen lights
• to test the light spots only, use puredata test patch for Teclumen test patch OR Wybron test patch

connect or not: researching the setup

phone side:

• download and install Connect or Not app from Google Playstore
• enable OSC transmission (Menu>Enable OSC)
• press the PLAY button to start counting and sending data
• make sure you are connected to a wireless network (doesn't need to be online)

laptop side:

• connect to the same WiFi network as the smartphone
• make sure the Wybron lights are correctly connected to the DMX shield (in series) and that the Arduino is connected to the laptop; check Arduino port and baudrate
• start the wybron-pd puredata patch

• browse, talk, send sms's and upload data over the network. observe changes in light colour and speed of change