emperor's new architecture research

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Connect or Not: Buhne A, Zurich, November 2013 ======

{{::image1772.png?nolink&590|}}

===== interaction scheme =====

{{::milicone-interaction-scheme.png?400}}

Android application > OSC data stream > Puredata patch 
airodump > csv                             ANDROID APP [PLAY]
            |                              |
            |                              |
            |                              |
            milicone-backup.py [PLAY]      |
            |      |                       |
            |      |                       |
            |    [OSC] :50000>           [OSC] :50000>
            |      |                             |   :49999>
            |      |                             |     |
            |      [ I N T E R A C T I O N ]     |     |
            |      PD: OSC_pd_Arduino-DMX.pd <:50000   |
            |                              |           |
            |                              |           |
            |                              |           |
            |                              |
            |                            DMX shield + Arduino > RGB Light
            |
            |                                          |
            |                                          |
            |                                          |
            |                        [ D O C U M E N T A T I O N ]
            |                        receive-osc.py > log/log(+UNIXtimestamp).txt <:49999
            |_______________________ milicone-direct-backup.py > log(+UNIXtimestamp).txt

===== technical details =====

RGB LED theatre lights + DMX shield + Arduino + Connect or Not Android app + laptop

==== hardware ====

  * 2 RGB LED light spots: //Teclumen Fusion color 18 FC RGBW//; ({{http://www.ecm-sa.ch/files/stage_color_18_fc_manuale.pdf|datasheet}}) DmxSetup: [1RGB, 8 channel]; ([[teclumen-test-pd]]) /OR/ //Wybron Cygnus VN100 model 7500// ({{http://www.wybron.com/stage-lighting-service-and-repair/documentation/user-manuals/Cygnus_ColorWash_Manual_v1.8.pdf|datasheet}}) DmxSetup: addr 0001 /// res 8bit /// fdr ON /// HSP OFF /// ([[wybron-test-pd]])
  * Arduino Uno
  * DMX shield by [[https://www.tindie.com/products/Conceptinetics/25kv-isolated-dmx-512-shield-for-arduino-rdm-capable-r2|Conceptinetics]]
  * laptop (Debian Wheezy) with built in wireless adapter Intel® Centrino® Advanced-N 6205 with Intel(R) Wireless WiFi driver for Linux, 3.11-2-amd64 (iwlwifi)
  * smartphone (Samsung Galaxy S3, Android 4.0.4)

==== software ====

  * Arduino [[DMX-simple|DMX Simple]] library, customized
  * [[arduino-pd|arduino.pd]] 
  * puredata patch with OSC server and lights controls [[wybron-pd|puredata patch using Wybron]] OR  [[teclumen-pd|puredata patch using Teclumen]] lights 
  * to test the light spots only, use puredata test patch for [[teclumen-test-pd|Teclumen test patch]] OR [[wybron-test-pd|Wybron test patch]]


connect or not: [[connect-or-not-setup|researching the setup]]

===== HOWTO =====

phone side:

  * download and install [[https://play.google.com/store/apps/details?id=net.lmag.connectornot|Connect or Not app from Google Playstore]]
  * enable OSC transmission (Menu>Enable OSC)
  * press the PLAY button to start counting and sending data
  * make sure you are connected to a wireless network (doesn't need to be online)

laptop side:

  * connect to the same WiFi network as the smartphone
  * make sure the Wybron lights are correctly connected to the DMX shield (in series) and that the Arduino is connected to the laptop; check Arduino port and baudrate
  * start the [[wybron-pd]] puredata patch

  * browse, talk, send sms's and upload data over the network. observe changes in light colour and speed of change
emperor's new architecture research

User Tools

Site Tools

Page Tools
