emperor's new architecture research

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

<code java>
/*
  Melody
 
 Plays a melody 
 
 circuit:
 * 8-ohm speaker on digital pin 8
 
 created 21 Jan 2010
 modified 30 Aug 2011
 by Tom Igoe 

This example code is in the public domain.
 
 http://arduino.cc/en/Tutorial/Tone
 
 */
 #include "pitches.h"

// notes in the melody:
int melody[] = {
  NOTE_C4, NOTE_G3,NOTE_G3, 165, NOTE_G3,0, NOTE_B3, NOTE_C4};

// note durations: 4 = quarter note, 8 = eighth note, etc.:
int noteDurations[] = {
  4, 8, 8, 4,4,4,4,4 };

void setup() {
  // iterate over the notes of the melody:
  for (int thisNote = 0; thisNote < 8; thisNote++) {

    // to calculate the note duration, take one second 
    // divided by the note type.
    //e.g. quarter note = 1000 / 4, eighth note = 1000/8, etc.
    int noteDuration = 1000/noteDurations[thisNote];
    tone(8, melody[thisNote],noteDuration);

    // to distinguish the notes, set a minimum time between them.
    // the note's duration + 30% seems to work well:
    int pauseBetweenNotes = noteDuration * 1.30;
    delay(pauseBetweenNotes);
    // stop the tone playing:
    noTone(8);
  }
}

void loop() {
  // no need to repeat the melody.
  // repeat this tone instead (pin 9 play 440Hz for 20ms every 60ms)
  tone(9, 440,20);
  delay(40);

}
</code>

emperor's new architecture research

User Tools

Site Tools

Page Tools